Payment & Shipping Terms:
|Product Name:||Electrostatic Spraying Equipment||Application::||Hardware Spraying Equipment|
|Gun Weight:||500 G||Input Powder:||40 W|
|Host||For the powder and gas source||Spray gun|
|Input voltage: 200-240v 50Hz||Input pressure: ≤0.3Mpa|
|Input powder: 40W||Input pressure: 0-0.6Mpa||The volume of the powder: max550g/min|
|Output pressure: 0-0.5Mpa||Output voltage: 0-100KV|
|The largest gas consumption: 13.2m/h (0.4Mpa)||Output current: 0-200uA|
|Volume of powder barrels: 45L||Gun weight:500g|
1) It is advisable to use thermosetting coatings, and thermosetting plastics should not be used in high temperature curing coatings.
2) Good dryness.
3) It is well atomized in the electrostatic field and has a certain conductivity.
4) Fineness and low viscosity.
5) Good hiding power and high viscosity.
Electrostatic spraying production process:
Pre-treatment of the workpiece surface → drying → electrostatic painting → leveling → baking (heating into film) → cooling → remove the workpiece